Справочник Пользователя для 3com SuperStack II
60
C
HAPTER
5: L
OGGING
O
N
AND
P
ERFORMING
A
DMINISTRATIVE
T
ASKS
Changing the
Default Console
Port Baud Rate
Default Console
Port Baud Rate
To attach a terminal with a baud rate other than 9600, follow
these steps:
these steps:
1 At the Network Manager prompt (Enterprise OS #), enter:
SysconF
The System Configuration menu is displayed.
2 Select the Console Port option.
A submenu displays the console port baud rate options.
3 Select the baud rate you want to use.
4 Set the terminal baud rate to match the baud rate configured for the
console port.
CAUTION: Do not reset the bridge/router before changing the terminal
baud rate. After the bridge/router resets, the new baud rate is used and
you will not be able to access the system software to enter any
commands at the default 9600 baud rate.
baud rate. After the bridge/router resets, the new baud rate is used and
you will not be able to access the system software to enter any
commands at the default 9600 baud rate.
5 After you change the terminal baud rate, reset the bridge/router.
The new console port baud rate does not become effective until you have
reset the bridge/router.
reset the bridge/router.
Adding User
Accounts
Accounts
You can add user accounts with either Network Manager or User
privilege. Some commands are available only to root.
privilege. Some commands are available only to root.
To add a user account, log on as root and use:
AddUser [<username>]
If you do not specify a username, you will be prompted for one. Specify
the privilege and password at the prompts.
the privilege and password at the prompts.
Delete an account using:
DELeteUser [<username>]
To force a user password to expire, use:
EXPire [<username>]
Any user can change their password by entering:
PassWord