Справочник Пользователя для 3com SuperStack II

C

HAPTER

 6: B

ASIC

 C

ONFIGURATION

 

OF

 P

ORTS

 

AND

 P

ATHS

2 In the U.S. and Canada, set the SPIDs and directory numbers (DNs) (if 

assigned by the telephone company) for each channel using:

SETDefault !3 -PATH SPIDdn1 “<string>”

DNs may be required for some DMS 100 or NI1 switches. When 
specifying both a SPID and a DN, enter the SPID, then a semicolon (;), 
then the DN.

If you have a second SPID or DN, use:

SETDefault !3 -PATH SPIDdn2 “<string>”

3 Set the local telephone number for each B channel using:

SETDefault !3.1 -PATH LocalDialNo = “<string>”

SETDefault !3.2 -PATH LocalDialNo = “<string>”

If you have only one local telephone number, enter the same number for 
both channels.

4 If you are planning to use channel B2 as a separate line, and your 

telecommunications carrier provided only one telephone number for all 
channels, specify a subaddress using:

SETDefault !3.2 -PATH LocalSubAddr = “<string>”

5 Enable both channels to make sure all settings take effect by entering:

In many areas, voice calls over ISDN are charged at a lower rate than data 
calls. You can specify that calls to a given number be established as voice 
calls. This feature is sometimes referred to as a TollSaver capability. 
Telephone companies often refer to this type of call as Switched 56 

Table 16   ISDN Switch Types Supported

NTT

Japan (domestic)

KDD

Japan (international)

ETSI

Europe and Asia Pacific region

NI1
ATT5ESS
DMS100

U.S. and Canada

AUSTEL

Australia

VN3

France