Справочник Пользователя для Zoom 0335-A 27337

Chapter 4: Status Monitoring

27

1111 

Before you can access the modem’s interface, you must first
change your computer’s TCP/IP settings to match the values
show in the table below. Be sure to make note of your

computer’s current TCP/IP settings before changing them.

How you access these settings and their names may vary

depending on whether you are using a Windows, Macintosh, or

Linux computer (for example, Gateway is called Router or

Router Address on Macintosh computers).

Any value between 10.0.0.4 and
10.0.0.20. For example, type 10.0.0.10.

Tip!
If do not know how to access your computer’s TCP/IP

settings, see Chapter 3: Setting TCP/IP Settings on

2222 

Log in to the Zoom Configuration Manager:

a

aa

a 

Open your Web browser and, in its address bar, type

http://10.0.0.2, then press the Enter key on your

keyboard. (You do not need to have an Internet
connection established to be able to view the interface.)

Tip!
If you are using a Windows computer, a Zoom icon

should have been placed on your desktop when you

installed the software provided with the modem. Instead

of typing one of the addresses above in your Web browser,

you can double-click the Zoom icon.