Справочник Пользователя для PC Concepts ADSL2+

Autodetect enables the modem to automatically detect and configure a valid ATM VC at 

startup. Autodetect eliminates the need to have users configure VC values as described in 

Configuring the ATM Virtual Circuit 

 

[Autodetect Modes] 

Autodetect can be used to establish PPPoE, PPPoA, IPoA-1577 and EoA connections and 

can be configured in either of two modes: 

 and 

. 

-- When Autodetect is configured in 

, it can detect the presence of PPPoE 

and EoA interfaces on the access server. In this mode, the modem must be configured as 

a bridge and a PPPoE or DHCP client is expected to be running on the LAN PC (behind 

the modem). 

-- When configured in 

, Autodetect can detect  PPPoE, EoA, PPPoA, or 

IPoA-1577 interfaces on the access server. Autodetect searches for these interfaces in 

that order. Depending on the interface detected, Autodetect creates a PPP, EoA, or IPoA 

interface on the modem. In this mode, the modem is expected to be configured as a router. 

[Configuring Autodetect] 

Follow these steps to configure Autodetect: 

(1) 

If the Autodetect page is not already displaying, click the Admin tab and then 

click Autodetect. 

(2) 

Select the appropriate Autodetect mode of operation from the Autodetect 

Mode drop-down list.