Справочник Пользователя для Sony 2140847

AirLink Helix User Guide

30

2140847

On supported models, the Helix has a Wi-Fi radio for wireless network 
connections. 

Note: You can lock yourself out of the Helix when you first turn on WEP or WPA. You must 
then enter the right key in the format required by your computer or device before you can 
connect to the Helix with Wi-Fi. WEP and WPA do not affect  Ethernet connections, so you 
can always connect to the Helix through an Ethernet port regardless of your encryption 
settings.

There is a Default interface (Bridged Ethernet and WiFi) and three Ethernet VLANs and 
WiFi WLAN interfaces respectively, in the interface column.

Enter your VLAN IDs here.

Three virtual ethernet interfaces for three VLANs in addition to the default LAN is displayed 
on the ACEmanager screen. 

WiFi 2, 3, and 4 have to be configured independently. 

Note: The address range of each WLAN is a separate subnet.

IP address of the Helix. By default this is set to 192.168.2.1. Changing this will affect the 
start and end IP address. Changing this will also require a reconnection to ACEmanager 
and physical reconnection of the LAN Ethernet.

The subnet mask indicates how large the IP address pool will be. Changing this will limit or 
expand the number of clients that can connect to the Helix. The default is 255.255.255.0 
and means that 254 clients can connect to the Helix.

Choose access to internet, “Yes” or “No” from scroll down option for Ethernet. WiFi is set to 
“Yes” by default.

Enabled or Disabled. By default, the Helix has a DHCP server that is enabled. Disabling the 
server will require all connected clients to have static IP addressing.

DHCP pool start IP address.

The Ending IP for the Ethernet Interface.