Справочник Пользователя для Siemens S223

User Manual                                                                               UMN:CLI 
SURPASS hiD 6615 S223/S323 R1.5 

A50010-Y3-C150-2-7619                                                                         365 

 {kernel | connected | 

 | ospf | bgp}  

 {kernel | connected | 

 | ospf | bgp } metric <0-16> 

 {kernel | connected | 

 | ospf | bgp } route-map 

 {kernel | connected | 

 | ospf | bgp } metric <0-16> 

 WORD 

Router 

Registers transmitted routing information in another 
router’s RIP table. 
1-16: metric value 
WORD: pointer to route-map entries 

 

To delete the configuration for redistributing routing information in another router’s RIP ta-
ble, use the following command. 

  {kernel | con-

 | static | ospf | bgp} 

  {kernel | con-

 | static | ospf | bgp } met-

 <0-16> 

  {kernel | con-

 | static | ospf | bgp} 

 WORD 

  {kernel | con-

 | static | ospf | bgp } met-

 <0-16> route-map WORD 

Router 

Removes the configuration of transmitted routing in-
formation in another router’s RIP table. 

 

As the needs of the case demand, you may also conditionally restrict the routing informa-
tion between the two networks using route-map command.   

To permit or deny the specific information, open the Route-map Configuration mode using 
the following command in Global Configuration mode. 

route-map  TAG 

{deny  |  permit} 

<1-65535> 

Global 

Creates the route map. 
TAG: route map tag 
1-65535: sequence number 

 

One or more match and set commands typically follow route-map command. If there are 
no match commands, then everything matches. If there are no set commands, nothing is 
done. Therefore, you need at least one match or set command.  

 

Use the following command on Route-map Configuration mode to limit the routing infor-
mation for transmitting to other routers’ RIP table.