Справочник Пользователя для Siemens 2602
3-4
Simple Setup Procedures
The management interface will guide you through sequence of steps required to configure the
SpeedStream 2602 for use with an ISDN TA or 56k, cable or DSL modem. As you click Enter on each
screen to accept the settings you enter, the next screen in sequence will display. You can, of course, jump
from one topic to another by simply clicking that topic in the main menu.
SpeedStream 2602 for use with an ISDN TA or 56k, cable or DSL modem. As you click Enter on each
screen to accept the settings you enter, the next screen in sequence will display. You can, of course, jump
from one topic to another by simply clicking that topic in the main menu.
•
Change Password – Set or change the administrator password.
•
Set Time Zone – Select the local time zone.
•
WAN – Specify the WAN connection type required by your Internet Service Provider (ISP).
Set or Change a Password
From the Simple Setup | Change Password screen, you can set a new password or change an existing
password to restrict management access. Passwords can consist of 3 to 12 alphanumeric characters and are
not case-sensitive.
password to restrict management access. Passwords can consist of 3 to 12 alphanumeric characters and are
not case-sensitive.
Although any user can access the Status and Help menus, the Setup and Tools configuration options are
permission-based and require a password. The default password is admin. To ensure system security, it is
recommended that you assign your Administrator a unique password as soon as possible.
permission-based and require a password. The default password is admin. To ensure system security, it is
recommended that you assign your Administrator a unique password as soon as possible.
Note:
If your password is lost or you cannot gain access to the management interface, restore the factory defaults.
Press and hold the Reset button for at least five seconds.
Press and hold the Reset button for at least five seconds.
1. On the main menu, click Simple Setup.
2. On the Simple Setup menu, click Change Password.
3. On the Change Password screen, enter the current password in the first text box; then enter the new
password in the next two text boxes.
4. Click Enter to save the settings and continue.
Set the Time Zone
The time zone setting is used for log entries and client filtering.
1. On the main menu, click Simple Setup.
2. On the Simple Setup menu, click Set Time Zone.
3. On the Set Time Zone screen, select the correct time zone in the drop-down list box.
4. Click Enter to save the setting and continue.
Configure the WAN Connection
You must specify the WAN connection type required by your Internet Service Provider (ISP):
•
Dynamic IP Address - The IP address is obtained automatically.
•
Static IP Address - Your ISP has assigned you a static (or fixed) IP address.
•
PPP over Ethernet - Some ISPs require PPPoE to connect to their services.