Справочник Пользователя для Siemens S323

UMN:CLI                                                                                                                                                              User  Manual 

SURPASS hiD 6615 S223/S323 R1.5 

334                                                                         A50010-Y3-C150-2-7619 

Open Router Configuration mode from Global Configuration mode. 

 [<1-65535>] 

Opens Router Configuration mode with enabling OSPF.

 [<1-65535>] 

Global 

Disables OSPF routing protocol. 

 

In case that more than 2 OSPF processes are operated, a process number should be as-
signed. Normally, there is one OSPF which is operating in one router. 

If OSPF routing protocol is disabled, all related configuration will be lost. 
 

 

Configure a network ID of OSPF. Network ID decides IP v4 address of this network. 

 A.B.C.D 

Assigns a router ID with enabling OSPF. 

 A.B.C.D 

Router 

Deletes a configured router ID. 

 

In case if using router-id command to apply new router ID on OSPF process, OSPF 
process must be restarted to apply. Use the clear ip ospf process command to restart 
OSPF process. 

If there is changing router ID while OSPF process is operating, configuration must be 
processed from the first. In this case, the hiD 6615 S323 can change only router ID with-
out changing related configurations. 

 A.B.C.D 

Changes only a router ID without changing related 
configurations. 

 A.B.C.D 

Router 

Deletes a changed router ID. 

 

To transfer above configuration to other routers, Use the clear ip ospf process com-
mand to restart OSPF process. 
 

To display configured router-id, use the following command. 

 

Enable 

Global 
Bridge 

Displays configured router ID