Справочник Пользователя для Epson 3300
Vigor3300 Series User’s Guide
31
The default setting of the console port is “baud rate 57600, no parity, and 8 bit with 1 stop
bit.”
3. Power on Vigor3300, then press ENTER before the system reboots completely
.
4.
Open Hyper Terminal on the PC.
Now, Vigor3300 can accept a TFTP download and will
display the following message:
****************************
* DrayTek V3300 Bootloader *
****************************
Press [ENTER] key within 5 sec. to download image...2
Current LAN IP is 192.168.1.1
New IP:
Prepare downloading.
5. Type the path name of the firmware image and activate the TFTP Client from the PC to
download the image. The corresponding message is shown as follows:
TFTP -i 192.168.1.1 PUT [Vigor3300 image file name]