Справочник Пользователя для EnGenius Technologies ESR-9710
ESR-9710 Wireless N Gigabit Router
Version 1.0
16
3.1.2 PPPoE (Point-to-Point Protocol over Ethernet)
The WAN interface can be configured as PPPoE. This type of connection is usually
used for a DSL service and requires a username and password to connect.
Select
the
Username / Password Connection (PPPoE) radio button and then click
on the Next button.
Address Mode: PPPoE can be used with a dynamic or static IP address. If you
select the Dynamic IP radio button, then the IIP address in the next field is not
required. However, if you select the Static IP radio button, then the IP address in the
next field is required.
required. However, if you select the Static IP radio button, then the IP address in the
next field is required.
User Name: Specify the user name which is provided by your ISP.
Password: Specify the password which is provided by your ISP, and then verify it
Password: Specify the password which is provided by your ISP, and then verify it
once again in the next field.
Service Name: Specify the name of the ISP.
Click on the Next button to continue.
Click on the Next button to continue.