Справочник Пользователя для Dynalink RTA1046VW
Wireless IAD User Manual
88
IP Routing – Static Route
The table shows all static route status and allows you to add new static IP route or
delete static route. A Static IP Routing is a manually defined path, which determines
the data transmitting route. If your local network is composed of multiple subnets,
you may want to specify a routing path to the routing table.
delete static route. A Static IP Routing is a manually defined path, which determines
the data transmitting route. If your local network is composed of multiple subnets,
you may want to specify a routing path to the routing table.
Destination Network Address:
Display the IP address that the data
packets are to be sent.
Display the IP address that the data
packets are to be sent.
Netmask, Gateway, WAN Interface:
Display the subnet mask, gateway,
and WAN interface information that
the transmitting data will pass through.
Display the subnet mask, gateway,
and WAN interface information that
the transmitting data will pass through.
Delete:
Allow you to remove the static route
settings.
settings.
This page shows all the routing
table of data packets going
through your IAD.
table of data packets going
through your IAD.
Adding a New One
To add a static route, please click Add. Type the destination network address,
subnet mask and gateway that you received from the ISP and click Apply.
subnet mask and gateway that you received from the ISP and click Apply.
Destination IP Address:
The destination IP address of the
network indicates where data packets
are to be sent. You may specify an IP,
type 0.0.0.0, or leave it blank.
The destination IP address of the
network indicates where data packets
are to be sent. You may specify an IP,
type 0.0.0.0, or leave it blank.
Netmask:
Enter the Netmask that you got from
the ISP, type 0.0.0.0, or leave it blank.
Enter the Netmask that you got from
the ISP, type 0.0.0.0, or leave it blank.
Gateway IP Address:
Check it to forward packets to the
specific gateway. Enter the gateway IP
address that you want to use.
Check it to forward packets to the
specific gateway. Enter the gateway IP
address that you want to use.
WAN Interface:
Click this button to forward packets to
a specific WAN interface. Choose one
from the drop-down menu.
a specific WAN interface. Choose one
from the drop-down menu.
For example, type 192.168.1.1 in
the field of the gateway IP address
and leave the destination network
blank.
the field of the gateway IP address
and leave the destination network
blank.
Click Apply to view the routing result.
If you have added an IPoA PVC from
Advanced- Internet Connections
webpage, you can forward packets to
it now. Just select it from the WAN
Interface drop down menu.
Advanced- Internet Connections
webpage, you can forward packets to
it now. Just select it from the WAN
Interface drop down menu.
Click Apply to save the setting.
You will see the result shown as the
right figure.
right figure.
If you don’t want the static route that
you created, please click the
you created, please click the
icon in
the Delete column from the table.
A dialog window will appear to confirm
your action. Click OK to remove the
static route, or click Cancel to keep
the setting.
your action. Click OK to remove the
static route, or click Cancel to keep
the setting.