Справочник Пользователя для Dynalink RTA1046VW

Chapter 4: Web Configuration 

                                                                                                                                                                                       

Now we are going to map USB, 
Wireless, and the first Ethernet port 
together with the bridge mode PVC. 
Click br_0_35 and press Add button, 
then use the same way to add USB, 
Wireless, and Ethernet1 to grouped 
interfaces. The four items are moved 
to the right box now. 

When the setting is done, click Apply.

 

Now we can check the result of the 
port mapping configuration. We have 
a default group, in which PPPoE mode 
will be applied through Ethernet port 2, 
3, and 4, and we have another group 
named bridge, in which the bridge 
mode will be applied on USB, 
Wireless, and Ethernet port1. 

You may click

to edit the created 

group, press

to delete it, or click Add

to create another group. 

 

The following relationship figure illustrates the port mapping configuration. 

 

Under this configuration, any devices that is connected to USB, Wireless, or 
Ethernet port 1 will connect to the internet through the bridge mode PVC br_0_35, 
while the PCs using Ethernet port 2, 3, and 4 will access the internet by the PPPoE 
connection pppoe_0_39_1.