Справочник Пользователя для Dynalink RTA1046VW

Chapter 4: Web Configuration 

                                                                                                                                                                                       

Voice over IP 

VoIP (Voice over IP) is a voice service provided by the ISP or VSP (Voice Service 
Provider). It compresses the voice signal into data package and transfers the data 
through the IP network. That is, it is a telecommunications service of sounds by the 
open Internet. With the Internet, it not only offers real-time sound service, but also it 
can connect to anywhere in the world. It allows users to carry out remote 
conversation without passing PSTN.   

VoIP provides you with a new way to gain more from your broadband connection - 
simply hook up your phone to the telephone adapter and create a service similar to 
an additional phone line. 

What is the advantage of VoIP?                                                             

¾ 

It can save your money on phone bills. 

¾ 

The equipment is cheaper than other telecom devices. 

¾ 

It uses current IP network. 

Below shows a brief hardware connection for executing VoIP function. 

 

1. 

Connect a telephone handset (or fax machine) to the Phone1 port and 
another telephone handset to Phone2 port (optional) on the wireless IAD 
separately by using phone cables. 

2. 

Use a phone cable to connect PSTN port on the wireless IAD to the Phone 
port on the splitter. 

3. 

Use a phone cable to connect DSL port on the wireless IAD to the Modem 
port on the splitter. 

4. 

Connect the telephone line from the wall outlet to the Line port of the splitter. 

Note: Microfilter/splitters can be purchased separately. To use the VoIP service 
without a microfilter/splitter connect the DSL port directly to the telephone wall 
outlet. However, with this configuration you cannot use the RTA1046VW for PSTN 
calls (conventional telephone service).