Справочник Пользователя для Dynalink RTA1046VW

Chapter 3: Accessing the Internet 

                                                                                                                                                                                       

PPP over Ethernet (PPPoE) Mode 

 

In this deployment environment, the PPPoE session is between the ADSL WAN 
interface and BRAS. The Wireless IAD gets a public IP address from BRAS when 
connecting to DSLAM. The multiple client PCs will get private IP address from the 
DHCP server enabled on private LAN. The enabled NAT mechanism will translate 
the IP information for clients to access the Internet. 

1. 

Start your browser and type 192.168.1.1 in the URL box to access ADSL 
web-based manager. 

2. Go 

to Quick Start – Quick Setup. Uncheck Auto Scan Internet Connection 

(PVC). Key in the VCI and VPI value, e.g.:   
VPI – 0 
VCI – 39 
Click the Next button. 

3. On 

the 

Configure Internet Connection – Connection Type page, select PPP 

over Ethernet (PPPoE) then click the Next button.   

4. On 

the 

WAN IP Settings page, select Obtain an IP address automatically 

and check Enable NAT box. Click Next. 

5. On 

the 

PPP Username and Password page, enter the PPP username and 

password that you got from your ISP. Select Always on or select Dial on 
Demand and key in the inactivity timeout value. (The default value is 20 
minutes.) Then click Next. 

6. On 

the 

Configure LAN side Settings page, key in the IP address and subnet 

mask for your LAN, e.g.:   
Primary IP address: 192.168.1.1 
Subnet Mask: 255.255.255.0 
Check DHCP Server on box. And key in the start and end IP address, e.g.: 
Start IP Address:192.168.1.2 
End IP Address: 192.168.1.254 
Then enter the leased time ( the default is 1 day), and click Next. 

7. 

Check the network information on This Internet Connection – Summary 
page. Make sure the settings match the information provided by your ISP. Click 
Finish.