Справочник Пользователя для Dynalink RTA1046VW

Chapter 3: Accessing the Internet 

                                                                                                                                                                                       

MER 

 

In this deployment environment, we make up a private IP network of 192.168.1.1. 
NAT function is enabled to support multiple clients to access to Internet. 

In this example, the Wireless IAD acts as a NAT device which translates a private IP 
address into a public address. Therefore multiple users can share with one public IP 
address to access the Internet through this IAD. The public address can be a static 
public address that is pre-assigned by ISP or a dynamic public address that is 
assigned by the ISP DHCP server. 

1.  Start your browser and type 192.168.1.1 in the URL box to access ADSL 

web-based manager. 

2. Go 

to Quick Start – Quick Setup. Uncheck Auto Scan Internet Connection 

(PVC). Key in the VCI and VPI value, e.g., 
VPI – 0 
VCI – 37   
Then click the Next button. 

3. On 

the 

Configure Internet Connection – Connection Type page, select 

Bridging and then click the Next button. 

4. On 

the 

WAN IP Settings page, select Obtain an IP address automatically; 

then, select Obtain DNS server address automatically.  

5. Check 

Enable NAT. Then click Next. 

6. On 

the 

Configure LAN side Settings page, key in the IP address and subnet 

mask for your LAN. Check DHCP Server On box, and enter the start and end 
points, e.g.: 
Primary IP address:192.168.1.1 
Subnet Mask:255.255.255.0 
Start IP Address:192.168.1.2 
End IP Address: 192.168.1.254 
Then key in the leased time that you want. And click Next 

7.  Check the network information on the Summary page. Make sure the contents 

match the settings provided by your ISP. Click Finish. 

8.  Now the IAD is well-configured. You can access the Internet. 

 

 

 

AAA

 

*BRAS: Broadband
Remote Access Server

ISP

 

(Internet Service Provider)