Справочник Пользователя для Dynalink RTA1046VW

Chapter 4: Web Configuration 

                                                                                                                                                                                       

Advanced Setup 

This page is the same as you can see on the Configure LAN side Settings page 
while running the Quick Setup. It allows you to set IP Address and Subnet Mask 
values for LAN interface. 

Primary IP Address:  
Key in the first IP address that you 
received from your ISP for the LAN 
connection. 

Subnet Mask:   
Key in the subnet mask that you 
received from your ISP for the LAN 
connection. 

Host Name: 
List the host name of this device. 

Domain Name: 
List the name of the domain. 

 

Configure the second IP Address 
and Subnet Mask:   
Check this box to enter another set 
of IP Address and Subnet Mask to 
connect to your IAD if they are not 
included in the range that DHCP 
server accepts.   

After checking this box, the 
secondary IP address and subnet 
mask entries will show up, as shown 
in the right figure. 

Secondary IP Address & Subnet 
Mask: Enter the information provided 
by your ISP for your LAN connection.

MTU:   
It means the maximum size of the 
packet that transmitted in the 
network. The packet of the data 
greater than the number set here will 
be divided into several packets for 
transmitting. Type the value into the 
field of MTU. The default setting is 
1500. 

Apply: 

 

Click this button to activate the 
settings listed above.