Справочник Пользователя для Enterasys Networks E1 Series

This example shows how to download and execute the clitxt.txt file. This command will reset the 
device: 

This example shows how to download and execute the cliappend.txt file. This command will not 
reset the device: 

Use this command to select the configuration file the device will load at startup.

set system bootconfig {flash | network file-location}

Switch command.

Read-Write.

None.

This example shows how to set the boot configuration file to flash:

Matrix>copy tftp://10.1.129.3/config/clitxt.txt device-config

Matrix>copy tftp://10.1.29.3/config/cliappend.txt device-config append

Loads the flash configuration file.

network 
file-location

Specifies a network file location from which to load the 
configuration file.

Matrix>set system bootconfig flash