Справочник Пользователя для Enterasys Networks E1 Series
General Configuration Command Set
Configuring Enterasys and Cisco Discovery Protocols
3-69
3.2.6.1
show cdp
Use this command to display the status of the Enterasys (CDP) Discovery Protocol and message
interval on one or more ports.
interval on one or more ports.
show cdp [port-string]
Syntax Description
Command Defaults
If port-string is not specified, the CDP state for all ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display Enterasys Discovery Protocol for Fast Ethernet front panel
ports 3 through 11:
ports 3 through 11:
port-string
(Optional) Displays Enterasys Discovery Protocol
information for specific port(s). For a detailed description
of possible port-string values, refer to
information for specific port(s). For a detailed description
of possible port-string values, refer to
Matrix>show cdp fe.0.3-11
CDP Version : 6
Global CDP State : auto
Global Hold Time : 180
Port State Port State Port State
---------------------------------------------------------------
fe.0.3 auto
fe.0.4 auto fe.0.5 auto
fe.0.6 auto
fe.0.7 auto fe.0.8 auto
fe.0.9 auto
fe.0.10 auto fe.0.11 auto