Справочник Пользователя для Enterasys Networks E1 Series
General Configuration Command Set
Configuring Enterasys and Cisco Discovery Protocols
3-75
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the Cisco Discovery Protocol timer to 120 seconds:
3.2.6.7
set ciscodp holdtime
Use this command to set the time to live (TTL) for Cisco Discovery Protocol PDUs. This is the
amount of time (in seconds) neighboring devices will hold PDU transmissions from the sending
device.
amount of time (in seconds) neighboring devices will hold PDU transmissions from the sending
device.
set ciscodp holdtime time
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
time
Specifies the number of seconds between PDU
transmissions. Valid values are 5 - 254.
transmissions. Valid values are 5 - 254.
Matrix>set ciscodp timer 120
time
Specifies the time to live for PDUs. Valid values are 10 -
255.
255.