Справочник Пользователя для Enterasys Networks E1 Series
Port Configuration Command Set
Reviewing Port Status
4-9
4.3.1.2
show port counters
Use this command to display counter statistics detailing traffic through the switch and through all
MIB2 network devices.
MIB2 network devices.
show port counters [port-string] [mib2 | switch]
Syntax Description
Command Defaults
If port-string is not specified, counter statistics will be displayed for all ports. If
mib2 or switch is not specified, all counter statistics will be displayed for the
specified port(s).
mib2 or switch is not specified, all counter statistics will be displayed for the
specified port(s).
Command Type
Switch command.
Command Mode
Read-Only.
Flow Ctrl
Whether flow control status is enabled, disabled, or N/A
(auto negotiation is enabled).
(auto negotiation is enabled).
Type
Port type as:
•
10/100TX: 10Base-T/100Base-T
•
100FX: 100Base-FX
•
1000SX: 1000Base-SX
•
1000LX: 1000Base-LX
port-string
(Optional) Displays counter statistics for specific port(s).
For a detailed description of possible port-string values,
refer to
For a detailed description of possible port-string values,
refer to
.
mib2 | switch
(Optional) Displays MIB2 or switch statistics. Switch
statistics detail performance of the Matrix E1 switch
device. MIB2 interface statistics detail performance of all
network devices.
statistics detail performance of the Matrix E1 switch
device. MIB2 interface statistics detail performance of all
network devices.
Table 4-2
show port status Output Details
Output
What It Displays...