Справочник Пользователя для Enterasys Networks E1 Series

This example shows how to display configured port speed for front panel ports 10 through 16: 

Use this command to configure the default speed of a port interface. This setting only takes effect 
on ports that have auto-negotiation disabled.

You can use this command to configure the default speed of a port while auto-negotiation is 
enabled. However, the configured speed will not take effect until auto-negotiation is disabled.

set port speed port-string {10 | 100 | 1000}

None.

Switch command.

Read-Write.

E1-2>show port speed fe.0.10-16

When autonegotiation is disabled,

the port speed setting is:

port      speed

--------------------

fe.0.10   10

fe.0.11   10

fe.0.12   10

fe.0.13   10

fe.0.14   10

fe.0.15   10

fe.0.16   10

Specifies the port(s) for which speed will be set. For a 
detailed description of possible port-string values, refer 
to 

.

10 | 100 | 1000

Specifies the port speed. Settings can be 10 Mbps, 100  
Mbps, or 1000 Mbps.