Справочник Пользователя для Enterasys Networks E1 Series
Port Configuration Command Set
Configuring Static Port Trunking
4-51
4.3.11.1 show trunk
Use this command to display trunking information for the device. Output will vary depending on
the link aggregation mode of the device, as shown in the examples below.
the link aggregation mode of the device, as shown in the examples below.
show trunk [trunk_name]
Syntax Description
Command Defaults
If trunk_name is not specified, information for all trunks will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Examples
This example shows how to display trunking information when the device is in 802.3ad mode:
trunk_name
(Optional, portTrunking mode only) Displays trunking
information for a specific trunk.
information for a specific trunk.
Matrix>show trunk
Device is in 802.3AD mode.
Trunking algorithm is round robin.
LACP Rx/Tx is globally enabled.
System Identifier: 00:01:f4:c5:f7:f0
Agg OKey ports
-----------------------------------------------------------
lag.0.1 100
fe.0.1 fe.0.2 fe.0.3 fe.0.4
Slag.0.2 100 None
lag.0.3 100 None
lag.1.1 11 None
lag.1.2 12 None
lag.2.1 100 None