Справочник Пользователя для Enterasys Networks E1 Series
Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Bridge Parameters
6-9
6.2.1.2
set spantree
Use this command to globally enable or disable the Spanning Tree protocol on the switch.
set spantree {disable | enable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Max Hops
Spanning Tree maximum hop count. Default of 20
can be changed using the set spantree maxhops
command, as described in
can be changed using the set spantree maxhops
command, as described in
.
SID
Spanning Tree ID.
Port
Spanning Tree port designation. For a detailed
description of possible port-string values, refer to
description of possible port-string values, refer to
.
State
Spanning Tree port state (listening, learning,
forwarding or blocked).
forwarding or blocked).
Role
Whether the port’s Spanning Tree role is root,
designated, backup, alternate, disabled or master.
designated, backup, alternate, disabled or master.
Cost
Cost value assigned to the port.
Priority
Port’s Spanning Tree priority.
disable | enable
Globally disables or enables Spanning Tree.
Table 6-1
show spantree stats Output Details (Continued)
Output
What It Displays...