Справочник Пользователя для Enterasys Networks E1 Series
VLAN Configuration Command Set
Reviewing Existing VLANs
7-6
7.3.1.2
show vlan static
Use this command to display all information related to a specific static VLAN or all static VLANs
known to the device. Static VLANs are those VLANs that you have manually created using this
command set, SNMP MIBs, or the WebView management application.
known to the device. Static VLANs are those VLANs that you have manually created using this
command set, SNMP MIBs, or the WebView management application.
show vlan static [vlan-list | vlan-name]
Syntax Description
Command Defaults
If vlan-list or vlan-name are not specified, information for all static VLANs will be
displayed.
displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows that the static VLAN 7 has the name green and is enabled to operate. Fast
Ethernet front panel ports 5 through 10, 12, and 30 are in the VLAN 7 port egress list and configured
to transmit frames tagged as VLAN 7 frames:
Ethernet front panel ports 5 through 10, 12, and 30 are in the VLAN 7 port egress list and configured
to transmit frames tagged as VLAN 7 frames:
vlan-list |
vlan-name
vlan-name
(Optional) Displays specific VLAN(s). For VLAN name to
display, it must first be set using the set vlan name
command. For details, refer to
display, it must first be set using the set vlan name
command. For details, refer to
Matrix>show vlan static 7
VLAN: 7 Name: green Status: enabled
Egress Ports
fe.0.5-10, fe.0.12, fe.0.30
Forbidden Egress Ports
None
Untagged Ports
None