Справочник Пользователя для Enterasys Networks E1 Series
VLAN Configuration Command Set
Assigning VLANs According to Classification Rules
7-34
7.3.5.5
clear vlan classification
Use this command to clear a VLAN classification entry.
clear vlan classification vlan-id data_meaning data _value [data_mask]
Syntax Description
Command Defaults
Data masks are required only for classification types requiring a second
data_value. For details, refer to
data_value. For details, refer to
Command Type
Switch command.
Command Mode
Read-Write.
IPX Class of Service
8
IPX Type
9
Protocol Type (Ether Type or DSAP/SSAP)
10
Receive Port
11
vlan-id
Specifies the number of the VLAN associated with the
classification to be cleared.
classification to be cleared.
data_meaning
Specifies the data_meaning of the classification to be
cleared. Refer to
cleared. Refer to
for lists of the
data_meanings and associated protocol types and
classifications.
classifications.
data _value
Specifies the data_value of the classification to be cleared.
The range of values is dependent on the data_meaning.
Refer to
The range of values is dependent on the data_meaning.
Refer to
for the limitations.
data_mask
(Not required for most data values.) This entry is dependent
on the data_value entered. For details, refer to
on the data_value entered. For details, refer to
Table 7-3
Classification Precedence (Continued)