Справочник Пользователя для Enterasys Networks E1 Series

Use this command to add ports to a priority classification rule. These ports will then be active for 
this rule.

set priority classification ingress priority_value port-string data_meaning 
data_value [data_mask]

Data masks are required only for classification types requiring a second 
data_value. For details, refer to 

Switch command.

Read-Write.

Specifies the number of the port priority (0 through 7) 
being associated with the priority ingress classification 
list.

Specifies the port(s) being added to the port priority 
ingress classification list. For a detailed description of 
possible port-string values, refer to 

.

Specifies the data_meaning for the parameter used to 
classify frames. Refer to 

 for the list of the 

data_meanings and associated protocol types and 
classifications.

data _value 

Specifies the code of a predefined classifier. The range of 
codes is dependent on the data_meaning. Refer to 

 for the limitations.

(Not required for most data values) Specifies a value 
dependent on the data_value entered. For details, refer to