Справочник Пользователя для Enterasys Networks E1 Series
Logging and Network Management Command Set
Monitoring Switch Network Events and Status
11-31
11.2.2.9 show users
Use this command to display information about the active console port or Telnet session(s) logged
in to the switch.
in to the switch.
Fragments
Number of received frames that are not the minimum
number of bytes in length, or received frames that had a bad
or missing Frame Check Sequence (FCS), were less than 64
bytes in length (excluding framing bits, but including FCS
bytes) and had an invalid CRC. It is normal for this value to
increment since fragments are a normal result of collisions
in a half-duplex network.
number of bytes in length, or received frames that had a bad
or missing Frame Check Sequence (FCS), were less than 64
bytes in length (excluding framing bits, but including FCS
bytes) and had an invalid CRC. It is normal for this value to
increment since fragments are a normal result of collisions
in a half-duplex network.
Jabbers
Total number of frames that were greater than 1518 bytes and
had either a bad FCS or a bad CRC.
had either a bad FCS or a bad CRC.
Octets
Total number of octets (bytes) of data, including those in bad
frames, received on this interface.
frames, received on this interface.
0 – 64 Octets
Total number of frames, including bad frames, received that
were 64 bytes in length (excluding framing bits, but including
FCS bytes).
were 64 bytes in length (excluding framing bits, but including
FCS bytes).
65 – 127 Octets
Total number of frames, including bad frames, received that
were between 65 and 127 bytes in length (excluding framing
bits, but including FCS bytes).
were between 65 and 127 bytes in length (excluding framing
bits, but including FCS bytes).
128 – 255 Octets
Total number of frames, including bad frames, received that
were between 128 and 255 bytes in length (excluding
framing bits, but including FCS bytes).
were between 128 and 255 bytes in length (excluding
framing bits, but including FCS bytes).
256 – 511 Octets
Total number of frames, including bad frames, received that
were between 256 and 511 bytes in length (excluding
framing bits, but including FCS bytes).
were between 256 and 511 bytes in length (excluding
framing bits, but including FCS bytes).
512 – 1023 Octets Total number of frames, including bad frames, received that
were between 512 and 1023 bytes in length (excluding
framing bits, but including FCS bytes).
framing bits, but including FCS bytes).
1024 – 1518 Octets Total number of frames, including bad frames, received that
were between 1024 and 1518 bytes in length (excluding
framing bits, but including FCS bytes).
framing bits, but including FCS bytes).
Table 11-5
show rmon stats Output Details (Continued)
Output
What It Displays...