Справочник Пользователя для Enterasys Networks E1 Series
Logging and Network Management Command Set
Configuring Node Aliases
11-70
11.2.5.3 set nodealias
Use this command to enable or disable a node alias agent on one or more ports. Upon packet
reception, node aliases are dynamically assigned to ports enabled with an alias agent, which is the
default setting on Matrix E1 Series devices. Node aliases cannot be statically created, but can be
deleted using the clear node alias command as described in
reception, node aliases are dynamically assigned to ports enabled with an alias agent, which is the
default setting on Matrix E1 Series devices. Node aliases cannot be statically created, but can be
deleted using the clear node alias command as described in
set nodealias {enable | disable} port-string
Table 11-8
show nodealias config Output Details
Output
What It Displays...
Total Control
Entries
Entries
Total aliases learned.
Active Entries
Number of Total Control Entries that are active (not marked
for deletion).
for deletion).
Purge Time
Last time the node alias table was cleared.
State
Node alias is ready to learn new entries.
Allocated Entries
Number of entries that have been allocated to all the ports.
This is the total of the Max Entries column.
This is the total of the Max Entries column.
Available Entries
Maximum node alias buffers available.
Port Number
Port designation.
Max Entries
Maximum number of alias entries configured for this port.
Set using the set nodealias maxentries command
(
Set using the set nodealias maxentries command
(
Used Entries
Number of alias entries (out of the maximum amount
configured) already used by this port.
configured) already used by this port.
Status
Whether or not a node alias agent is enabled (default) or
disabled on this port.
disabled on this port.