Справочник Пользователя для Enterasys Networks E1 Series

This example shows how to display CEP status for each detection type on port ge.0.1. In this case 
the default state of disabled for each type has not been changed:

This example shows default CEP policy information. In this case, no policies have been configured 
for the three CEP detection types:

Use this command to globally enable or disable CEP detection.

set cep {enable | disable}

None.

Switch command.

Read-Write.

Matrix>show cep port ge.0.1

CEP Detection:           - disabled

ge.0.1

         H323 phone      - disabled

         Siemens phone   - disabled

         Cisco phone     - disabled

Matrix>show cep policy 

CEP default policies

   CEP Type  Policy Index  Policy Name

   --------  ------------  ------------

   H323

   Siemens

   Cisco

enable | disable

Globally enables or disables CEP detection.