Справочник Пользователя для Enterasys Networks E1 Series

IP Configuration Command Set

Reviewing IP Traffic and Configuring Routes

12-36

Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide

Example

This example shows output from a successful ping to IP address 182.127.63.23:

This example shows output from an unsuccessful ping to IP address 182.127.63.24:

12.2.5.9 traceroute

Use this command to display a hop-by-hop path through an IP network from the device to a
specific destination host. Three ICMP probes will be transmitted for each hop between the source
and the traceroute destination.

traceroute host

Syntax Description

Command Type

Router command.

Command Mode

Privileged EXEC: Matrix>Router#

Command Defaults

None.

Matrix>Router#ping 182.127.63.23

Reply from 182.127.63.23

------ PING 182.127.63.23 : Statistics ------

3 packets transmitted, 3 packets received, 0% packet loss

Matrix>Router#ping 182.127.63.24

Timed Out

------ PING 182.127.63.24 : Statistics ------

3 packets transmitted, 0 packets received, 100% packet loss

host

Specifies a host to which the route of an IP packet will be
traced.