Справочник Пользователя для Enterasys Networks E1 Series
Process Overview: Routing Protocol Configuration
Configuring RIP
13-22
Syntax Description
Command Syntax of the “no” Form
The “no” form of this command disables passive interface:
no passive-interface vlan vlan_id
Command Type
Router command.
Command Mode
Router configuration: Matrix>Router(config-router)#
Command Defaults
None.
Example
This example shows how to set VLAN 2 as a passive interface. No RIP updates will be transmitted
on VLAN 2:
on VLAN 2:
13.1.1.20receive-interface
Use this command to allow RIP to receive update packets on an interface. This does not affect the
sending of RIP updates on the specified interface.
sending of RIP updates on the specified interface.
receive-interface vlan vlan_id
Syntax Description
Command Syntax of the “no” Form
The no use of this command denies the reception of RIP updates:
vlan vlan_id
Specifies the number of the VLAN to make a passive
interface. This VLAN must be configured for IP routing as
described in
interface. This VLAN must be configured for IP routing as
described in
.
Matrix>Router(config)#router rip
Matrix>Router(config-router)#passive-interface vlan 2
vlan vlan_id
Specifies the number of the VLAN to make a receive
interface. This VLAN must be configured for IP routing as
described in
interface. This VLAN must be configured for IP routing as
described in
.