Справочник Пользователя для Enterasys Networks E1 Series

To review and configure 802.1X authentication for one or more ports using EAPOL (Extensible 
Authentication Protocol Over LANs). 802.1X controls network access by enforcing user 
authorization on selected ports, which results in allowing or denying network access according to 
user profiles on the RADIUS server.

The commands needed to review and configure 802.1X are listed below and described in the 
associated section as shown:

show dot1x (

show dot1x auth-config (

)

set dot1x (

)

set dot1x auth-config (

set dot1x port (

)

clear dot1x auth-config (

)

show eapol (

)

set eapol (

For an overview on 802.1X port-based authentication, refer to 

NOTES: When both 802.1X and MAC authentication are enabled on the same device, 
the switch enforces a precedence relationship between MAC authentication and 802.1X 
methods. For more information on these precedence rules, refer to 

In addition to the EAPOL commands described in this section, Matrix E1 (1G58x-09 and 
1H582-xx) devices with firmware versions 3.xx.xx and higher also support a dot1x 
command set for enabling and configuring 802.1X authentication. The dot1x 
commands that can be used alternatively to eapol commands are noted in the 
appropriate sections under the heading “Command Alternative (v3.xx.xx and higher)”.