Справочник Пользователя для Enterasys Networks E1 Series
Security Configuration Command Set
Configuring MAC Authentication
14-37
14.3.3.5 set macauthentication port
Use this command to enable or disable one or more ports for MAC authentication.
set macauthentication port {enable | disable}[port-string]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
If port-string is not specified, MAC authentication will be enabled or disabled on
all ports.
all ports.
Example
This example shows how to enable MAC authentication on Fast Ethernet front panel ports 1
through 5:
through 5:
NOTE: Enabling port(s) for MAC authentication requires globally enabling MAC
authentication on the device as described in
authentication on the device as described in
, and then enabling it on a
port-by-port basis. By default, MAC authentication is globally disabled and disabled on
all ports.
all ports.
enable | disable
Enables or disables MAC authentication.
port-string
(Optional) Enables or disables MAC authentication on
specific port(s). For a detailed description of possible
port-string values, refer to
specific port(s). For a detailed description of possible
port-string values, refer to
.
Matrix>set macauthentication port enable fe.0.1-5