Справочник Пользователя для Enterasys Networks E1 Series
Security Configuration Command Set
Configuring MAC Authentication
14-42
14.3.3.12set macauthentication quietperiod
Use this command to set the time (in seconds) following a failed MAC authentication before
another attempt can be made through a port.
another attempt can be made through a port.
set macauthentication quietperiod time [port-string]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
If port-string is not specified, the authentication quiet period will be set on all MAC
authentication ports.
authentication ports.
Example
This example shows how to globally set the MAC quiet period to 3600 seconds (1 hour):
time
Specifies the number of seconds between reauthentication
attempts. Valid values are 1 - 4294967295. Default is 30.
attempts. Valid values are 1 - 4294967295. Default is 30.
port-string
(Optional) Sets the MAC authentication quiet period on
specific port(s). For a detailed description of possible
port-string values, refer to
specific port(s). For a detailed description of possible
port-string values, refer to
.
Matrix>set macauthentication quietperiod 3600