Справочник Пользователя для Enterasys Networks E1 Series
General Configuration Command Set
Setting Basic Device Properties
3-38
3.2.2.10 set system name
Use this command to configure a name for the system.
set system name [“name_string”]
Syntax Description
Command Defaults
If name_string is not specified, the system name will be set to a blank string.
Command Type
Switch command.
Command Mode
Read-Write.
Usage Guidelines
None.
Table 3-5
show version Output Details
Output
What It Displays...
Slot
Fixed front panel or expansion module slot location
designation. For details on how slots are numbered, refer to
designation. For details on how slots are numbered, refer to
Ports
Number of ports in the fixed front panel or expansion
module.
module.
Model
Model number of the chassis or expansion module.
Serial Number
Serial number (if applicable) of the chassis or expansion
module.
module.
HW Version
Hardware version number (if applicable) of the chassis or
expansion module.
expansion module.
FW Version
Current firmware version number (if applicable).
name_string
(Optional) Specifies a text string that identifies the system.
A name string containing a space in the text must be
enclosed in quotes as shown in the example below.
A name string containing a space in the text must be
enclosed in quotes as shown in the example below.