Справочник Пользователя для Enterasys Networks E1 Series
General Configuration Command Set
Setting Basic Device Properties
3-42
Example
This example shows how to set the terminal columns to 50:
3.2.2.15 set system timeout
Use this command to set the time (in minutes) an idle local (console) or remote login session will
remain connected before timing out.
remain connected before timing out.
set system timeout timeout [console | remote]
Syntax Description
Command Defaults
If console or remote are not specified, both timeout values will be set.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the system timeout for both console and remote logins to 10
minutes:
minutes:
3.2.2.16 show summertime
Use this command to display daylight savings time settings.
show summertime
Syntax Description
None.
Matrix>set terminal cols 50
timeout
Specifies the number of minutes the system will remain idle
before timing out. Valid values are 1 to 60.
before timing out. Valid values are 1 to 60.
console | remote
(Optional) Sets the console or remote (Telnet) timeout.
Matrix>set system timeout 10