Справочник Пользователя для Dynalink RTA1025W

ADSL Router User Manual 

 

Example – Static Route 
Here provides you an example of Static Route. 

 

For the LAN shown above, if the PC in the subnet of 192.168.1.x wants to access 
the PC in the subnet of 192.168.10.x, we can set a static route in the ADSL router, in 
which the destination is the PC in the subnet 192.168.10.x and the gateway is router 
B. The setting would be as follows: 
Destination: 192.168.10.0 
Netmask:   255.255.255.0  (Standard Class C) 
Gateway:   192.168.1.254  (Router B) 

Routing Information Protocol (RIP) is utilized by means of exchanging routing 
information between routers. It helps the routers to determine optimal routes. This 
page allows you to enable/disable this function. 

RIP Version: 

 

It incorporates the RIP information 
when receiving and broadcasting the 
RIP packets. From the drop down 
menu, select a RIP version to be 
accepted, 1, 2 or both. 

Operation:  
There are two modes for you to 
choose, Active and Passive. Select 
Active for transmitting and receiving 
data, or select Passive for receiving 
data only.   

Enabled:   
Check Enabled to enable the RIP 
function on different interface. 
Otherwise, disable this function. 

Click Apply to invoke the settings set 
here.