Справочник Пользователя для Dynalink RTA1025W

ADSL Router User Manual 

 

Select traffic direction from the drop 
down menu, and check the network 
interface which you want this rule to 
apply on. Then, choose a protocol and 
define the source or destination MAC 
address which you want to control. 

There are three options for traffic 
direction: Outbound means from local 
network to Internet; Inbound means 
from Internet to local network; 
Bi-direction includes both directions. 

 

The protocols that you can choose is 
listed as the right figure shows. Select 
one proper protocol for this bridge 
filtering rule. 

 

For example, if we choose Outbound, 
check br_0_35, select PPPoE as 
protocol, and enter 00:90:96:01:2A:C3 
into the Source MAC Address field, 
then after clicking Apply, we will see 
the result as shown in the right.   

You can use Add or Delete button to 
maintain the bridge filtering rules. 

This page allows you to specify the IP 
packet filtering rules to prevent the 
services accessed from the Internet 
hosts or limit the Internet access for 
local hosts. 

Choose Disabled to disable the 
firewall function. Click Enabled to 
invoke the settings that you set in this 
web page. 

To initiate the IP Filtering, please 
select the Enabled radio button and 
click Apply.  

Select the direction to filter 
packets:     
Inbound means the data is transferred 
from outside onto your computer. 
Outbound means the data is 
transferred from your computer onto 
outside through Internet. Please 
choose Outbound traffic or Inbound 
traffic as the direction for filtering 
packets. 

To add a new Filtering rule, click Add.