Справочник Пользователя для Dynalink RTA1025W

Before You Use

Supports up to 4096 learning MAC addresses

Transparent Bridging among 10/100 Mb Ethernet, USB, and 802.11g wireless
LAN

Supports IGMP Snooping

Supports 802.1Q VLAN packet pass-through

Routing Features

NAT (Network Address Translation) / PAT (Port Address Translation) let
multiple users on the LAN to access the internet for the cost of only one IP
address.

ALGs (Application Level Gateways): such as NetMeeting, MSN Messenger,
FTP, Quick Time, mIRC, Real

Player, CuSeeMe, VPN pass-through with

multiple sessions, RTSP, SIP, etc.

Port Forwarding: the users can setup multiple virtual servers (e.g., Web, FTP,
Mail servers) on user’s local network.

Support DMZ

UPnP IGD (Internet Gateway Device) with NAT traversal capability

Static routes, RFC1058 RIPv1, RFC1723 RIPv2

DNS Relay, Dynamic DNS

DHCP Client/Relay/Server

Time protocol can be used to get current time from network time server

Support IGMP Proxy

Support port mapping function which allows you to assign all data traffic
transmitted among specific Internet connections and LAN ports

Support IP/Bridge QoS for prioritize the transmission of different traffic classes

Support 802.1Q VLAN Tagging

Security Features

PAP (RFC1334), CHAP (RFC1994), and MS-CHAP/MS-CHAP2 for PPP
session

Firewall support IP packets filtering based on IP address/Port number/Protocol
type

Bridge packet filtering (optional)

URL filtering (optional)

Support DoS (Deny of Services) which detect & protect a number of attacks
(such as SYN/FIN/RST Flood, Smurf, WinNuke, Echo Scan, Xmas Tree Scan,
etc)

Configuration and Management

User-friendly embedded web configuration interface with password protection

Remote management accesses control

Telnet/SSH session for local or remote management

Firmware upgrades through HTTP, TFTP, or FTP

The boot loader contains very simple web page to allow the users to update
the run-time firmware image.

Configuration file backup and restore