Справочник Пользователя для Dynalink RTA1025W

Chapter 4: Web Configuration 

                                                                                                                                                                                       

To configure security features for the Wireless interface, please open Security item 
from Wireless menu. This web page offers eight authentication protocols for you to 
secure your data while connecting to networks. There are nine selections including 
64-bit and 128-bit WEP, 802.1X, WPA, WPA-PSK, WPA2, WPA2-PSK, mixed 
WPA2/WPA, and mixed WPA2/WPA-PSK. Different item leads to different web page 
settings. Please read the following information carefully. 

Select Wireless Network: 
Select the wireless network which you 
want to configure the security settings 
from the drop down list. 

Wireless Security:   
The Disabled item offers you the less 
protection for wireless communication. 
If you choose Disabled, the 
Encryption Keys will not be shown on 
this page. 

There are nine wireless security 
modes for you to select. 

 

Wireless Security:   
Select the WEP mode for the security 
function; there are two options, 64-bit 
and 128-bit. Before being transmitted, 
the data will be encrypted using the 
encryption key. For example, if you set 
64-bit in this field, then the receiving 
station must be set to use 64 Bit 
Encryption, and have the same Key 
value at the same time; otherwise, it 
will not be able to decrypt the data.