Справочник Пользователя для Dynalink RTA1025W

Chapter 4: Web Configuration 

                                                                                                                                                                                       

As shown on the web page, you can 
view the system log and configure 
system log whenever you want. 

To view the system log, you must 
configure system log first. Press 
Configure System Log to start. 

You can enable or disable the log 
function, and choose log level, 
display level and proper mode as 
you like. Then click Apply to invoke 
the settings or press Cancel to 
discard them. 

 

There are 8 types of log level and 
display level for you to choose.   

Log Level:  
This function enables you to decide 
how detailed the messages will be 
stored. Set a proper level according to 
your needs. The default Log Level is 
Debugging. 

The Debugging Level logs all 
messages to the file, while the 
Emergency Level logs fatal 
messages only. The lower the item is, 
the more detailed information it 
provides; i.e., debugging level stores 
the most detailed information.   

Owing to the limitation of the storage 
on the ADSL router, the former 
information will be erased and 
replaced by the latest message 
automatically when the buffer is 
overflowed.   

 

 

Display Level:  
For the convenience of the users, the 
display level can function as a filter. It 
decides the level for the messages to 
exhibit when the user wants to view 
the logs on the local side. For 
example,    for a programmer or 
engineer, he/she may want to know 
about debugging or informational level 
message; for general users, they may 
only need or want to learn about error, 
critical, alert, or emergency messages 
only. The default Display Level is 
Error.