Справочник Пользователя для Dynalink RTA1025W
Chapter 2: System Requirement and Installation
5
USB Driver Installation
If the ADSL router is connected to a PC through the USB interface, you will be
prompted for the USB drivers when plugging the USB cable to the PC. Refer to the
relevant operating system to install the USB drivers.
prompted for the USB drivers when plugging the USB cable to the PC. Refer to the
relevant operating system to install the USB drivers.
For Windows ME
n
Run the USB installation program from the CD provided in your router
package.
o
An
InstallShield Wizard will appear. Please wait for a moment.
p
When the welcome screen appears, click Next for the next step.
q
When the complete window of the InstallShield Wizard appears, click
Finish.
Finish.
r
Link your router and the PC with a USB cable.
s
The system will detect the USB driver automatically.
Then, the system will
copy the proper files for this router.
Note: If the USB device is not detected automatically, check the USB cable
between the PC and the device. Besides, verify that the device is power on.
between the PC and the device. Besides, verify that the device is power on.
t
When the file copying finished, the dialog above will close. Now the USB
driver is installed properly. You can use the router.
driver is installed properly. You can use the router.
For Windows 2000
n
Run the USB installation program from the CD provided in your router
package.
package.
o
An InstallShield Wizard will appear. Please wait for a moment.
p
When the welcome screen appears, click Next for the next step.