Справочник Пользователя для Dynalink RTA1025W

ADSL Router User Manual 

 

Numbered IP over ATM (IPoA)+NAT 

 

In this deployment environment, we make up a private IP network of 192.168.1.1. 
NAT function is enabled (on ADSL Router or use another NAT box connected to hub) 
to support multiple clients to access the Router and some public servers (WWW, 
FTP).  

If you apply for multiple IP addresses from your ISP, you can assign these public IP 
addresses to the ADSL Router and public server, e.g., Web or FTP server. Typically 
the first IP is network address, the second is used as router IP address and the last 
one is subnet broadcasting. Other remaining IP addresses can be assigned to PCs 
on the LAN. 

The following example uses the IP address ranging from 10.11.80.81 to 10.11.80.86 
and the subnet mask is 255.255.255.248.  

1. 

Start your browser and type 192.168.1.1 in the URL box to access ADSL 
web-based manager. 

2. Go 

to Quick Start – Quick Setup. Uncheck Auto Scan Internet Connection 

(PVC). Key in the VCI and VPI value, e.g.:   
VPI – 0 
VCI – 32 
Click the Next button. 

3. On 

the 

Configure Internet Connection – Connection Type page, select IP 

over ATM (IPoA) then click Next.  

4. On 

the 

WAN IP Settings page, select Use the following IP address and Use 

the following DNS Server Address, then key in the information that your ISP 
offered, e.g.:   
WAN IP Address: 10.11.80.81 
WAN Subnet Mask: 255.255.255.248 
Primary DNS server: 168.95.1.1 
Secondary DNS server: 168.95.192.1   

5. Check 

the 

Enable NAT box. And click Next.