Справочник Пользователя для Dynalink RTA1025W

Chapter 4: Web Configuration 

                                                                                                                                                                                       

Quick Start 

The pages under the Quick Start menu provide user a quick way to set up the router. 
If you do not know much about the router, you can use the Quick Start pages to 
adjust basic settings to activate your router. 

This is a quick way to connect to the 
Internet by using PPPoE interface, 
please click Connect to Internet to 
open the web page. 

Enter the user name and password 
(that you get from the ISP) for your 
ADSL router and click Connect. 

The system will connect automatically, 
and then you can access the Internet. 

The quick setup wizard will guide you 
to configure the ADSL router through 
some specific steps. Yet different 
connection interface will lead to 
different setting pages. Refer to the 
following pages for detailed 
information. 

Auto Scan Internet Connection 
(PVC):  
If there is no any PVC configured in 
your ADSL router, you can check this 
item. Otherwise, please uncheck this 
box.  

VPI (Virtual Path Identifier): Identifies 
the virtual path between endpoints in 
an ATM network. The valid range is 
from 0 to 255. To enter the setting, 
please refer to the setting that the ISP 
offered. 

VCI (Virtual Channel Identifier): 
Identifies the virtual channel endpoints 
in an ATM network. The valid range is 
from 32 to 65535 (1 to 31 is reserved 
for well-known protocols). To enter the 
setting, please refer to the setting that 
the ISP gave you. 

After entering the VPI/VCI value, 
please click Next for the following 
step.