Справочник Пользователя для Dynalink RTA1025W

ADSL Router User Manual 

 

Advanced Setup 

This page is the same as you can see on the Configure LAN side Settings page 
while running the Quick Setup. It allows you to set IP Address and Subnet Mask 
values for LAN interface. 

Primary IP Address:  
Key in the first IP address that you 
received from your ISP for the LAN 
connection. 

Subnet Mask:   
Key in the subnet mask that you 
received from your ISP for the LAN 
connection. 

Host Name: 
List the host name of this device. 

Domain Name: 
List the name of the domain. 

Configure the secondary IP 
Address and Subnet Mask:   
Check this box to enter another set of 
IP Address and Subnet Mask to 
connect to your router if they are not 
included in the range that DHCP 
server accepts.   

After checking this box, the secondary 
IP address and subnet mask entries 
will show up, as shown in the right 
figure. 

Secondary IP Address & Subnet 
Mask: Enter the information provided 
by your ISP for your LAN connection. 

MTU:   
It means the maximum size of the 
packet that transmitted in the network. 
The packet of the data greater than 
the number set here will be divided 
into several packets for transmitting. 
Type the value into the field of MTU. 
The default setting for LAN 
configuration is 1500. 

Apply: 

 

Click this button to activate the 
settings listed above.