Справочник Пользователя для Dynalink RTA1335
Default Configuration for New Zealand
This Router is shipped with the following factory default settings.
Router IP address
192.168.1.1
Subnet mask
255.255.255.0
VPI
0
VCI
100
Connect mode
PPPoA VC-MUX
NAT
enabled
DSL line mode
G.DMT
WAN IP
dynamic
DHCP enabled
DNS relay
DNS relay
on
UPnP IGD
enabled
Firewall:
Incoming requests
Incoming requests
blocked
Outgoing traffic
not blocked
Router configuration & management:
User name
User name
admin
Password
admin
Telnet password
admin
The majority of users in New Zealand will be able to connect using the default
factory setting. They can skip Section 6 of this Guide.
factory setting. They can skip Section 6 of this Guide.
Only if your ISP advises
explicitly that you have a ”PPPoE service”, then you need to follow Section 6.
Before you start
Make sure your computer has these installed:
Ethernet port
TCP/IP protocol enabled
A web browser, Internet Explorer 5.x/Firefox1.x/Netscape 6 or better.
Obtain your Internet account information from your ISP:
Login user name and password
Public IP address (only if you subscribe for static IP)
DNS server IP (only if specified by ISP).
1
2
ADSL 2+ 4-Port Modem Router Quick Set-up Guide