Справочник Пользователя для Fortinet Version 3.0

FortiBridge Version 3.0 Administration Guide

09-30000-0163-20061109

Completing the basic FortiBridge configuration

Setting up FortiBridge units

Type the password for this administrator and press Enter.

The default admin account does not require a password. For improved security,
you should add a password for this account as soon as possible. Use the
procedure

“Adding an administrator password” on page 27

to add a password.

The following prompt appears:

Welcome !

FortiBridge-1000 #

You have connected to the FortiBridge CLI, and you can enter CLI commands.

Connecting to the FortiBridge CLI using Telnet

By default, you can use a Telnet client running on a management computer to
connect to the FortiBridge CLI. The management computer must be connected to
the same network as the FortiBridge INT 1 interface.

The default FortiBridge management IP address is 192.168.1.99. Your
management PC should be configured to connect to this IP address. Alternatively,
you can connect to the FortiBridge console and use the procedure

“Changing the

management IP address” on page 27

to change the management IP address.

To connect to the CLI using Telnet

On the management computer, Telnet to the IP address 192.168.1.99.

If you have changed the management IP address, Telnet to this address instead.

Type a valid administrator name and press Enter.

The default administrator account is admin.