Справочник Пользователя для Fortinet Version 3.0

Use this command to configure probes for ping, HTTP, FTP, POP3, SMTP, and IMAP traffic. Probes 
monitor different types of traffic. For each protocol you configure the time interval between probes 
(interval) and how many lost probes are required to register a failure (threshold). You can also enable 
each probe and in all cases except ping you can specify the port used by the probe.

config probe probe_list {ping | http | ftp | pop3 | smtp | imap}

set <keyword>

end

config probe probe_list {ping | http | ftp | pop3 | smtp | imap}

unset <keyword>

end

get probe probe_list {ping | http | ftp | pop3 | smtp | imap}

show probe probe_list {ping | http | ftp | pop3 | smtp | imap}

Use the following command to enable HTTP probes and change the HTTP failure threshold to 5 and 
the probe interval to 3.

config probe probe_list http

set status enable

set failure_threshold 5

set probe_interval 3

end

This example shows how to display the settings for the probe probe_list command.

get probe probe_list

This example shows how to display the settings for the http probe.

get probe probe_list http

This example shows how to display the configuration for the probe probe_list command.

show probe probe_list

•

failure_threshold 

<threshold_integer>

The number of probe packets that are lost before the 
FortiBridge unit determines that the FortiGate unit has failed.

3

probe_interval 

<probe_integer>

The number of seconds between probe packets.

1

status {disable | enable}

Enable or disable sending probe packets for the current 
probe protocol

disable

test_port 

<port-number_integer>

The port number on which the probe sends packets for a 
give protocol. 

ping (none)

http 80

ftp 21

pop3 110

smtp 25

imap 143