Справочник Пользователя для Intellinet Network Solutions 502566
HARDWARE CONNECTIONS
Connecting the router
1. Plug in one end of the network cable to the WAN port of the router.
2. Plug in the other end of the network cable to the Ethernet port of the xDSL or
2. Plug in the other end of the network cable to the Ethernet port of the xDSL or
cable modem.
3. Use another network cable to connect to the Ethernet card on the computer
3. Use another network cable to connect to the Ethernet card on the computer
system; the other end of the cable connects to the LAN port of the router.
Since the Wireless Super G Router has four ports, you can connect up to
four computers directly to the unit. You do not have to buy a switch to
connect these computers since one Wireless Super G Router functions both
as a connection-sharing unit and as a switch.
Checking the installation
The control LEDs of the router are clearly visible, and the status of the network
The control LEDs of the router are clearly visible, and the status of the network
link can be seen instantly:
1. With the power source on, once the device is connected to the broadband
1. With the power source on, once the device is connected to the broadband
modem, the Power, System, LAN, WLAN and WAN port LEDs of the router
will light up, indicating a normal status.
2. When the WAN is linked to the ADSL/cable modem, the WAN port’s LED
2. When the WAN is linked to the ADSL/cable modem, the WAN port’s LED
will light up.
3. When the LAN is linked up to the computer system, the LAN port’s LED will
3. When the LAN is linked up to the computer system, the LAN port’s LED will
light up.
10
HARDWARE INSTALLATION