Справочник Пользователя для RAD Data comm ASMi-52
Installation and Operation Manual
Chapter 5 Configuring a Typical Application
ASMi-52 Ver. 2.5
Configuring the ASMi-52 units
5-3
Set the CO ASMi-52 unit clock to Internal.
Set the CPE ASMi-52 unit clock to Receive.
3. Select Save to save the changes.
To set the device host IP address:
1. Display the host IP menu (Main menu > Configuration > System
1. Display the host IP menu (Main menu > Configuration > System
Configuration > Management > Host IP.
The host IP screen appears.
2. From the host IP menu, configure the following:
ASMi-52 IP address – 172.17.161.73
Host IP mask – 255.255.255.0
Host default gateway IP address – 172.17.161.1
ASMi-52
Host IP address (172.17.161.730)
Host IP mask (255.255.255.01)
Host default gateway (172.17.161.1)
Read community (public)
Write community (public)
Trap community (public)
Host IP mask (255.255.255.01)
Host default gateway (172.17.161.1)
Read community (public)
Write community (public)
Trap community (public)
>
ESC-prev. menu; !-main menu; &-exit; @-scroll
Figure 5-3. Host IP Menu
3. Press ESC to return to previous menu (Management menu).
4. Save the changes.
4. Save the changes.
Setting the E1 Port
To select E1 framing mode:
1. Display the Framed Mode menu (Main menu > Configuration > E1
1. Display the Framed Mode menu (Main menu > Configuration > E1
Configuration > E1 Local Port menu > Framed Mode).
The Framed Mode menu appears.
ASMi-52
Framed mode (Unframed)
1. Unframed
2. G732N
3. G732S transparent
>
ESC-prev. menu; !-main menu; &-exit; @-scroll
ESC-prev. menu; !-main menu; &-exit; @-scroll
Figure 5-4. Frame Mode (Unframed) Menu